This makes the tests easier to read and modify without having out of
order numbers. When writing the tests, you'll remember more easily which
section you're erroring in too!
The original string interpolation was based on hil which didn't allow
proper escaping, since they used a different escape pattern. Secondly,
the golang Unquote function didn't deal with the variable substitution,
which meant it had to be performed in a second step.
Most importantly, because we did this partial job in Unquote (the fact
that is strips the leading and trailing quotes tricked me into thinking
I was done with interpolation!) it was impossible to remedy the
remaining parts in a second pass with hil. Both operations needs to be
done in a single step. This is logical when you aren't tunnel visioned.
This patch replaces both of these so that string interpolation works
properly. This removes the ability to allow inline function calls in a
string, however this was an incidental feature, and it's not clear that
having it is a good idea. It also requires you wrap the var name with
curly braces. (They are not optional.)
This comes with a load of tests, but I think I got some of it wrong,
since I'm quite new at ragel. If you find something, please say so =D In
any case, this is much better than the original hil implementation, and
easy for a new contributor to patch to make the necessary fixes.
Struct types with duplicate fields are invalid types and weren't caught
by the parser. This fixes the issue and adds some associated tests. It
also checks and tests for duplicate struct value field names.
As a technical side-note, this doesn't change the lang/types/ functions
to remove panics-- the signatures are simplified to make their use
simple, and we intentionally panic if they're used incorrectly. In this
case, one was being used without having previously validated the input.
Thanks to Patrick Meyer for finding this issue via fuzzing!
Since we focus on safety, it would be nice to reduce the chance of any
runtime errors if we made a typo for a resource parameter. With this
patch, each resource can export constants into the global namespace so
that typos would cause a compile error.
Of course in the future if we had a more advanced type system, then we
could support precise types for each individual resource param, but in
an attempt to keep things simple, we'll leave that for another day. It
would add complexity too if we ever wanted to store a parameter
externally.
Lastly, we might consider adding "special case" parsing so that directly
specified fields would parse intelligently. For example, we could allow:
file "/tmp/hello" {
state => exists, # magic sugar!
}
This isn't supported for now, but if it works after all the other parser
changes have been made, it might be something to consider.
This should give us options as to how a function should interact with an
FS. I feel like it's cleaner to go through the World API, and passing in
the FsURI lets us do that, but I passed in the Fs at the same time in
case it's useful for some reason. I think using it is a boundary
violation, but it's just a hunch. Does anything break when we move from
one deploy to the next?
This adds a giant missing piece of the language: proper function values!
It is lovely to now understand why early programming language designers
didn't implement these, but a joy to now reap the benefits of them. In
adding these, many other changes had to be made to get them to "fit"
correctly. This improved the code and fixed a number of bugs.
Unfortunately this touched many areas of the code, and since I was
learning how to do all of this for the first time, I've squashed most of
my work into a single commit. Some more information:
* This adds over 70 new tests to verify the new functionality.
* Functions, global variables, and classes can all be implemented
natively in mcl and built into core packages.
* A new compiler step called "Ordering" was added. It is called by the
SetScope step, and determines statement ordering and shadowing
precedence formally. It helped remove at least one bug and provided the
additional analysis required to properly capture variables when
implementing function generators and closures.
* The type unification code was improved to handle the new cases.
* Light copying of Node's allowed our function graphs to be more optimal
and share common vertices and edges. For example, if two different
closures capture a variable $x, they'll both use the same copy when
running the function, since the compiler can prove if they're identical.
* Some areas still need improvements, but this is ready for mainstream
testing and use!
If a test failed in stage 2 (fail2) instead of an expected fail in stage
3 (fail3) then it would continue running, which was an undefined
behaviour in our API. IOW we should not run Unify if SetScope failed.
This patch adds these additional checks to ensure our tests are more
robust.
If you want to know which test to run, it's not always obvious, so by
adding the -short flag, we'll get a listing that we can use! You'll need
to add -v as well so that the output actually displays.
The simple type unification algorithm suffered from some serious
performance and memory problems when used with certain code bases. This
adds some crucial optimizations that improve performance drastically.
This quotes printed strings that contain special characters such as
newline. This changes the output of some tests, but makes future tests
that include a raw \n more appropriate.
Part of this was rotten, and not fully functional. This fixes the rot,
adds some tests, and improves the type checking that occurs when sending
and receiving values. In addition, a significant portion of this happens
at compile time.
There is still more work to be done here, but this should get us a good
chunk of the way for now.
The engine core had some unfortunate bugs that were the result of some
early design errors when I wasn't as familiar with channels. I've
finally rewritten most of the bad parts, and I think it's much more
logical and stable now.
This also simplifies the resource API, since more of the work is done
completely in the engine, and hidden from view.
Lastly, this adds a few new metaparameters and associated code.
There are still some open problems left to solve, but hopefully this
brings us one step closer.
This greatly expands our test infra to allow us to drop in mcl tests and
look at their resource graph output. The only downside is that this only
runs the function engine once, so if the function graph would be
constantly changing over time, then this is not a good fit here.
These weren't yet exposed in mcl. They're now available under the same
Meta namespace as the normal meta param structs. Even though they live
as a separate trait, they should be exposed together for a consistent
interface in mcl. If autoedge or autogroup ever grow additional params,
we can always add: `Meta:autoedge:something` to break it down further.
This signals to an interested consumer that two or more compatible
resources can be merged safely. This is so that we can avoid the
"duplicate resource" design problem that puppet had.
To test this, you can run:
./mgmt run --tmp-prefix lang --lang 'pkg "cowsay" { state => "installed", } pkg "cowsay" { state => "newest", }'
which should work.
This enables imports in mcl code, and is one of last remaining blockers
to using mgmt. Now we can start writing standalone modules, and adding
standard library functions as needed. There's still lots to do, but this
was a big missing piece. It was much harder to get right than I had
expected, but I think it's solid!
This unfortunately large commit is the result of some wild hacking I've
been doing for the past little while. It's the result of a rebase that
broke many "wip" commits that tracked my private progress, into
something that's not gratuitously messy for our git logs. Since this was
a learning and discovery process for me, I've "erased" the confusing git
history that wouldn't have helped. I'm happy to discuss the dead-ends,
and a small portion of that code was even left in for possible future
use.
This patch includes:
* A change to the cli interface:
You now specify the front-end explicitly, instead of leaving it up to
the front-end to decide when to "activate". For example, instead of:
mgmt run --lang code.mcl
we now do:
mgmt run lang --lang code.mcl
We might rename the --lang flag in the future to avoid the awkward word
repetition. Suggestions welcome, but I'm considering "input". One
side-effect of this change, is that flags which are "engine" specific
now must be specified with "run" before the front-end name. Eg:
mgmt run --tmp-prefix lang --lang code.mcl
instead of putting --tmp-prefix at the end. We also changed the GAPI
slightly, but I've patched all code that used it. This also makes things
consistent with the "deploy" command.
* The deploys are more robust and let you deploy after a run
This has been vastly improved and let's mgmt really run as a smart
engine that can handle different workloads. If you don't want to deploy
when you've started with `run` or if one comes in, you can use the
--no-watch-deploy option to block new deploys.
* The import statement exists and works!
We now have a working `import` statement. Read the docs, and try it out.
I think it's quite elegant how it fits in with `SetScope`. Have a look.
As a result, we now have some built-in functions available in modules.
This also adds the metadata.yaml entry-point for all modules. Have a
look at the examples or the tests. The bulk of the patch is to support
this.
* Improved lang input parsing code:
I re-wrote the parsing that determined what ran when we passed different
things to --lang. Deciding between running an mcl file or raw code is
now handled in a more intelligent, and re-usable way. See the inputs.go
file if you want to have a look. One casualty is that you can't stream
code from stdin *directly* to the front-end, it's encapsulated into a
deploy first. You can still use stdin though! I doubt anyone will notice
this change.
* The scope was extended to include functions and classes:
Go forth and import lovely code. All these exist in scopes now, and can
be re-used!
* Function calls actually use the scope now. Glad I got this sorted out.
* There is import cycle detection for modules!
Yes, this is another dag. I think that's #4. I guess they're useful.
* A ton of tests and new test infra was added!
This should make it much easier to add new tests that run mcl code. Have
a look at TestAstFunc1 to see how to add more of these.
As usual, I'll try to keep these commits smaller in the future!
This expands the Stmt and Expr interfaces to add an Init method. This
is used to pass in Debug and Logf values, but is also used to validate
the AST. This gets rid of standalone use of the "log" package.
This allows golang tests to be marked as root or !root using build tags.
The matching tests are then run as expected using our test runner.
This also disables test caching which is unfriendly to repeated test
running and is an absurd golang default to add.
Lastly this hooks up the testing verbose flag to tests that accept a
debug variable.
These tests aren't enabled on travis yet because of how it installs
golang.
This giant patch makes some much needed improvements to the code base.
* The engine has been rewritten and lives within engine/graph/
* All of the common interfaces and code now live in engine/
* All of the resources are in one package called engine/resources/
* The Res API can use different "traits" from engine/traits/
* The Res API has been simplified to hide many of the old internals
* The Watch & Process loops were previously inverted, but is now fixed
* The likelihood of package cycles has been reduced drastically
* And much, much more...
Unfortunately, some code had to be temporarily removed. The remote code
had to be taken out, as did the prometheus code. We hope to have these
back in new forms as soon as possible.
This is an initial implementation of the mgmt language. It is a
declarative (immutable) functional, reactive, domain specific
programming language. It is intended to be a language that is:
* safe
* powerful
* easy to reason about
With these properties, we hope this language, and the mgmt engine will
allow you to model the real-time systems that you'd like to automate.
This also includes a number of other associated changes. Sorry for the
large size of this patch.
