engine: event: Switch events system to use simpler structs

Pass around pointers of things now. Also, naming is vastly improved and
clearer.

engine/event/event.go

@@ -25,9 +25,59 @@ type Kind int
 
 // The different event kinds are used in different contexts.
 const (
-	EventNil Kind = iota
-	EventStart
-	EventPause
-	EventPoke
-	EventExit
+	KindNil Kind = iota
+	KindStart
+	KindPause
+	KindPoke
+	KindExit
 )
+
+// Pre-built messages so they can be used directly without having to use NewMsg.
+// These are useful when we don't want a response via ACK().
+var (
+	Start = &Msg{Kind: KindStart}
+	Pause = &Msg{Kind: KindPause} // probably unused b/c we want a resp
+	Poke  = &Msg{Kind: KindPoke}
+	Exit  = &Msg{Kind: KindExit}
+)
+
+// Msg is an event primitive that represents a kind of event, and optionally a
+// request for an ACK.
+type Msg struct {
+	Kind Kind
+
+	resp chan struct{}
+}
+
+// NewMsg builds a new message struct. It will want an ACK. If you don't want an
+// ACK then use the pre-built messages in the package variable globals.
+func NewMsg(kind Kind) *Msg {
+	return &Msg{
+		Kind: kind,
+		resp: make(chan struct{}),
+	}
+}
+
+// CanACK determines if an ACK is possible for this message. It does not say
+// whether one has already been sent or not.
+func (obj *Msg) CanACK() bool {
+	return obj.resp != nil
+}
+
+// ACK acknowledges the event. It must not be called more than once for the same
+// event. It unblocks the past and future calls of Wait for this event.
+func (obj *Msg) ACK() {
+	close(obj.resp)
+}
+
+// Wait on ACK for this event. It doesn't matter if this runs before or after
+// the ACK. It will unblock either way.
+// TODO: consider adding a context if it's ever useful.
+func (obj *Msg) Wait() error {
+	select {
+	//case <-ctx.Done():
+	//	return ctx.Err()
+	case <-obj.resp:
+		return nil
+	}
+}

engine/graph/actions.go

@@ -347,7 +347,7 @@ func (obj *Engine) Worker(vertex pgraph.Vertex) error {
 	var limiter = rate.NewLimiter(res.MetaParams().Limit, res.MetaParams().Burst)
 	// It is important that we shutdown the Watch loop if this exits.
 	// Example, if Process errors permanently, we should ask Watch to exit.
-	defer obj.state[vertex].Event(event.EventExit) // signal an exit
+	defer obj.state[vertex].Event(event.Exit) // signal an exit
 	for {
 		select {
 		case err, ok := <-obj.state[vertex].outputChan: // read from watch channel
@@ -464,11 +464,11 @@ func (obj *Engine) Worker(vertex pgraph.Vertex) error {
 			//	err = errwrap.Wrapf(err, "permanent process error")
 			//}
 
-			// If this exits, defer calls Event(event.EventExit),
+			// If this exits, defer calls: obj.Event(event.Exit),
 			// which will cause the Watch loop to shutdown. Also,
 			// if the Watch loop shuts down, that will cause this
 			// Process loop to shut down. Also the graph sync can
-			// run an Event(event.EventExit) which causes this to
+			// run an: obj.Event(event.Exit) which causes this to
 			// shutdown as well. Lastly, it is possible that more
 			// that one of these scenarios happens simultaneously.
 			return err

engine/graph/engine.go

@@ -196,7 +196,7 @@ func (obj *Engine) Commit() error {
 	}
 	vertexRemoveFn := func(vertex pgraph.Vertex) error {
 		// wait for exit before starting new graph!
-		obj.state[vertex].Event(event.EventExit) // signal an exit
+		obj.state[vertex].Event(event.Exit) // signal an exit
 		obj.waits[vertex].Wait()            // sync
 
 		// close the state and resource
@@ -276,7 +276,7 @@ func (obj *Engine) Start() error {
 		}
 
 		if unpause { // unpause (if needed)
-			obj.state[vertex].Event(event.EventStart)
+			obj.state[vertex].Event(event.Start)
 		}
 	}
 	// we wait for everyone to start before exiting!
@@ -301,7 +301,7 @@ func (obj *Engine) Pause(fastPause bool) {
 	for _, vertex := range topoSort { // squeeze out the events...
 		// The Event is sent to an unbuffered channel, so this event is
 		// synchronous, and as a result it blocks until it is received.
-		obj.state[vertex].Event(event.EventPause)
+		obj.state[vertex].Event(event.Pause)
 	}
 
 	// we are now completely paused...

engine/graph/state.go

@@ -65,7 +65,7 @@ type State struct {
 	// events is a channel of incoming events which is read by the Watch
 	// loop for that resource. It receives events like pause, start, and
 	// poke. The channel shuts down to signal for Watch to exit.
-	eventsChan chan event.Kind // incoming to resource
+	eventsChan chan *event.Msg // incoming to resource
 	eventsLock *sync.Mutex     // lock around sending and closing of events channel
 	eventsDone bool            // is channel closed?
 
@@ -93,7 +93,7 @@ type State struct {
 
 // Init initializes structures like channels.
 func (obj *State) Init() error {
-	obj.eventsChan = make(chan event.Kind)
+	obj.eventsChan = make(chan *event.Msg)
 	obj.eventsLock = &sync.Mutex{}
 
 	obj.outputChan = make(chan error)
@@ -256,7 +256,7 @@ func (obj *State) Poke() {
 // Event sends a Pause or Start event to the resource. It can also be used to
 // send Poke events, but it's much more efficient to send them directly instead
 // of passing them through the resource.
-func (obj *State) Event(kind event.Kind) {
+func (obj *State) Event(msg *event.Msg) {
 	// TODO: should these happen after the lock?
 	obj.wg.Add(1)
 	defer obj.wg.Done()
@@ -268,7 +268,7 @@ func (obj *State) Event(kind event.Kind) {
 		return
 	}
 
-	if kind == event.EventExit { // set this so future events don't deadlock
+	if msg.Kind == event.KindExit { // set this so future events don't deadlock
 		obj.Logf("exit event...")
 		obj.eventsDone = true
 		close(obj.eventsChan) // causes resource Watch loop to close
@@ -277,7 +277,7 @@ func (obj *State) Event(kind event.Kind) {
 	}
 
 	select {
-	case obj.eventsChan <- kind:
+	case obj.eventsChan <- msg:
 
 	case <-obj.exit.Signal():
 	}
@@ -285,40 +285,40 @@ func (obj *State) Event(kind event.Kind) {
 
 // read is a helper function used inside the main select statement of resources.
 // If it returns an error, then this is a signal for the resource to exit.
-func (obj *State) read(kind event.Kind) error {
-	switch kind {
-	case event.EventPoke:
+func (obj *State) read(msg *event.Msg) error {
+	switch msg.Kind {
+	case event.KindPoke:
 		return obj.event() // a poke needs to cause an event...
-	case event.EventStart:
+	case event.KindStart:
 		return fmt.Errorf("unexpected start")
-	case event.EventPause:
+	case event.KindPause:
 		// pass
-	case event.EventExit:
+	case event.KindExit:
 		return engine.ErrSignalExit
 
 	default:
-		return fmt.Errorf("unhandled event: %+v", kind)
+		return fmt.Errorf("unhandled event: %+v", msg.Kind)
 	}
 
 	// we're paused now
 	select {
-	case kind, ok := <-obj.eventsChan:
+	case msg, ok := <-obj.eventsChan:
 		if !ok {
 			return engine.ErrWatchExit
 		}
-		switch kind {
-		case event.EventPoke:
+		switch msg.Kind {
+		case event.KindPoke:
 			return fmt.Errorf("unexpected poke")
-		case event.EventPause:
+		case event.KindPause:
 			return fmt.Errorf("unexpected pause")
-		case event.EventStart:
+		case event.KindStart:
 			// resumed
 			return nil
-		case event.EventExit:
+		case event.KindExit:
 			return engine.ErrSignalExit
 
 		default:
-			return fmt.Errorf("unhandled event: %+v", kind)
+			return fmt.Errorf("unhandled event: %+v", msg.Kind)
 		}
 	}
 }
@@ -335,45 +335,45 @@ func (obj *State) event() error {
 			return nil // sent event!
 
 		// make sure to keep handling incoming
-		case kind, ok := <-obj.eventsChan:
+		case msg, ok := <-obj.eventsChan:
 			if !ok {
 				return engine.ErrWatchExit
 			}
-			switch kind {
-			case event.EventPoke:
+			switch msg.Kind {
+			case event.KindPoke:
 				// we're trying to send an event, so swallow the
 				// poke: it's what we wanted to have happen here
 				continue
-			case event.EventStart:
+			case event.KindStart:
 				return fmt.Errorf("unexpected start")
-			case event.EventPause:
+			case event.KindPause:
 				// pass
-			case event.EventExit:
+			case event.KindExit:
 				return engine.ErrSignalExit
 
 			default:
-				return fmt.Errorf("unhandled event: %+v", kind)
+				return fmt.Errorf("unhandled event: %+v", msg.Kind)
 			}
 		}
 
 		// we're paused now
 		select {
-		case kind, ok := <-obj.eventsChan:
+		case msg, ok := <-obj.eventsChan:
 			if !ok {
 				return engine.ErrWatchExit
 			}
-			switch kind {
-			case event.EventPoke:
+			switch msg.Kind {
+			case event.KindPoke:
 				return fmt.Errorf("unexpected poke")
-			case event.EventPause:
+			case event.KindPause:
 				return fmt.Errorf("unexpected pause")
-			case event.EventStart:
+			case event.KindStart:
 				// resumed
-			case event.EventExit:
+			case event.KindExit:
 				return engine.ErrSignalExit
 
 			default:
-				return fmt.Errorf("unhandled event: %+v", kind)
+				return fmt.Errorf("unhandled event: %+v", msg.Kind)
 			}
 		}
 	}

engine/resources.go

@@ -100,11 +100,11 @@ type Init struct {
 
 	// Events returns a channel that we must watch for messages from the
 	// engine. When it closes, this is a signal to shutdown.
-	Events chan event.Kind
+	Events chan *event.Msg
 
 	// Read processes messages that come in from the Events channel. It is a
 	// helper method that knows how to handle the pause mechanism correctly.
-	Read func(event.Kind) error
+	Read func(*event.Msg) error
 
 	// Dirty marks the resource state as dirty. This signals to the engine
 	// that CheckApply will have some work to do in order to converge it.