all: Switch the --lang syntax to use argv instead

It was a bit awkward using `mgmt run lang --lang <input>` so instead, we now drop the --lang, and read the positional argv for the input. This also does the same for the --yaml frontend.
2019-05-05 10:37:53 -04:00
parent b3632584c3
commit 43839d1090
42 changed files with 91 additions and 78 deletions
--- a/test/shell/augeas-1.sh
+++ b/test/shell/augeas-1.sh
@@ -5,7 +5,7 @@
 mkdir -p "${MGMT_TMPDIR}"
 echo > "${MGMT_TMPDIR}"sshd_config

-$TIMEOUT "$MGMT" run --tmp-prefix yaml --yaml=augeas-1.yaml &
+$TIMEOUT "$MGMT" run --tmp-prefix yaml augeas-1.yaml &
 pid=$!

 # kill server on error
--- a/test/shell/env0.sh
+++ b/test/shell/env0.sh
@@ -14,7 +14,7 @@ if [[ ! "$tmpdir" =~ "/tmp" ]]; then
 	exit 99
 fi

-env TMPDIR="${tmpdir}" TEST=123 EMPTY="" $TIMEOUT "$MGMT" run --tmp-prefix --converged-timeout=5 lang --lang env0.mcl
+env TMPDIR="${tmpdir}" TEST=123 EMPTY="" $TIMEOUT "$MGMT" run --tmp-prefix --converged-timeout=5 lang env0.mcl
 e=$?

 egrep "$regex" "$tmpdir/environ" || fail_test "Could not match '$(cat "$tmpdir/environ")' in '$tmpdir/environ' to '$regex'."
--- a/test/shell/exchange.sh
+++ b/test/shell/exchange.sh
@@ -17,7 +17,7 @@ sleep 10s
 $TIMEOUT "$MGMT" run --hostname h4 --seeds http://127.0.0.1:2379 --client-urls http://127.0.0.1:2385 --server-urls http://127.0.0.1:2386 --tmp-prefix --no-pgp empty &
 pid4=$!
 sleep 10s
-$TIMEOUT "$MGMT" deploy --no-git --seeds http://127.0.0.1:2379 lang --lang exchange0.mcl
+$TIMEOUT "$MGMT" deploy --no-git --seeds http://127.0.0.1:2379 lang exchange0.mcl

 # kill servers on error/exit
 #trap 'pkill -9 mgmt' EXIT
--- a/test/shell/exchange0.mcl
+++ b/test/shell/exchange0.mcl
@@ -4,7 +4,7 @@
 # time ./mgmt run --hostname h2 --seeds http://127.0.0.1:2379 --client-urls http://127.0.0.1:2381 --server-urls http://127.0.0.1:2382 --tmp-prefix --no-pgp empty
 # time ./mgmt run --hostname h3 --seeds http://127.0.0.1:2379 --client-urls http://127.0.0.1:2383 --server-urls http://127.0.0.1:2384 --tmp-prefix --no-pgp empty
 # time ./mgmt run --hostname h4 --seeds http://127.0.0.1:2379 --client-urls http://127.0.0.1:2385 --server-urls http://127.0.0.1:2386 --tmp-prefix --no-pgp empty
-# time ./mgmt deploy --no-git --seeds http://127.0.0.1:2379 lang --lang examples/lang/exchange0.mcl
+# time ./mgmt deploy --no-git --seeds http://127.0.0.1:2379 lang examples/lang/exchange0.mcl

 import "sys"
 import "world"
--- a/test/shell/exec-fail.sh
+++ b/test/shell/exec-fail.sh
@@ -5,7 +5,7 @@
 # should take a few seconds plus converged timeout, and test we don't hang!
 # TODO: should we return a different exit code if the resources fail?
 # TODO: should we be converged if one of the resources has permanently failed?
-$TIMEOUT "$MGMT" run --converged-timeout=15 --no-watch --no-pgp --tmp-prefix yaml --yaml exec-fail.yaml &
+$TIMEOUT "$MGMT" run --converged-timeout=15 --no-watch --no-pgp --tmp-prefix yaml exec-fail.yaml &
 # there's no ^C sent... it should shutdown on its own
 pid=$!
 wait $pid	# get exit status
--- a/test/shell/exec-usergroup.sh
+++ b/test/shell/exec-usergroup.sh
@@ -40,7 +40,7 @@ function run_usergroup_test() {
 	setup

 	# run till completion
-	sudo -A $TIMEOUT "$MGMT" run --converged-timeout=15 --no-watch --tmp-prefix yaml --yaml ./exec-usergroup/${graph} &
+	sudo -A $TIMEOUT "$MGMT" run --converged-timeout=15 --no-watch --tmp-prefix yaml ./exec-usergroup/${graph} &
 	pid=$!
 	wait $pid	# get exit status
 	e=$?
--- a/test/shell/file-mode.sh
+++ b/test/shell/file-mode.sh
@@ -5,7 +5,7 @@
 set -x

 # run till completion
-$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix yaml --yaml file-mode.yaml &
+$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix yaml file-mode.yaml &
 pid=$!
 wait $pid	# get exit status
 e=$?
--- a/test/shell/file-move-upper-dir.sh
+++ b/test/shell/file-move-upper-dir.sh
@@ -9,7 +9,7 @@ exit 0
 mkdir -p /tmp/mgmt/a/b/c/

 # run empty graph, with prometheus support
-$TIMEOUT "$MGMT" run --tmp-prefix yaml --yaml=examples/deep-dirs.yaml &
+$TIMEOUT "$MGMT" run --tmp-prefix yaml examples/deep-dirs.yaml &
 pid=$!
 sleep 10s	# let it converge

--- a/test/shell/file-move.sh
+++ b/test/shell/file-move.sh
@@ -6,7 +6,7 @@ mkdir -p /tmp/mgmt/
 rm /tmp/mgmt/f1 &>/dev/null || true

 # run empty graph, with prometheus support
-$TIMEOUT "$MGMT" run --tmp-prefix yaml --yaml=file-move.yaml 2>&1 | tee /tmp/mgmt/file-move.log &
+$TIMEOUT "$MGMT" run --tmp-prefix yaml file-move.yaml 2>&1 | tee /tmp/mgmt/file-move.log &
 pid=$!
 sleep 5s	# let it converge

--- a/test/shell/file-owner.sh
+++ b/test/shell/file-owner.sh
@@ -11,7 +11,7 @@ if ! timeout 1s sudo -A true; then
 fi

 # run till completion
-$TIMEOUT sudo -A "$MGMT" run  --converged-timeout=5 --no-watch --tmp-prefix yaml --yaml file-owner.yaml &
+$TIMEOUT sudo -A "$MGMT" run  --converged-timeout=5 --no-watch --tmp-prefix yaml file-owner.yaml &
 pid=$!
 wait $pid	# get exit status
 e=$?
--- a/test/shell/file-source.sh
+++ b/test/shell/file-source.sh
@@ -11,7 +11,7 @@ if ! timeout 1s sudo -A true; then
 fi

 # run till completion
-$TIMEOUT sudo -A "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix lang --lang file-source.mcl &
+$TIMEOUT sudo -A "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix lang file-source.mcl &
 pid=$!
 wait $pid	# get exit status
 e=$?
--- a/test/shell/graph-exit1.sh
+++ b/test/shell/graph-exit1.sh
@@ -5,7 +5,7 @@
 # should take 15 seconds for longest resources plus startup time to shutdown
 # we don't want the ^C to allow the rest of the graph to continue executing!
 # this is a test of mgmt exiting quickly via a fast pause after it sees a ^C
-$TIMEOUT "$MGMT" run --no-watch --no-pgp --tmp-prefix lang --lang graph-exit1.mcl &
+$TIMEOUT "$MGMT" run --no-watch --no-pgp --tmp-prefix lang graph-exit1.mcl &
 pid=$!
 sleep 5s	# let the initial resources start to run...
 killall -SIGINT mgmt	# send ^C to exit mgmt
--- a/test/shell/graph-exit2.sh
+++ b/test/shell/graph-exit2.sh
@@ -4,7 +4,7 @@

 # should take 15 seconds for longest resources plus startup time to shutdown
 # we don't want the ^C to allow the rest of the graph to continue executing!
-$TIMEOUT "$MGMT" run --no-watch --no-pgp --tmp-prefix yaml --yaml graph-exit2.yaml &
+$TIMEOUT "$MGMT" run --no-watch --no-pgp --tmp-prefix yaml graph-exit2.yaml &
 pid=$!
 sleep 10s	# let the initial resources start to run...
 killall -SIGINT mgmt	# send ^C to exit mgmt
--- a/test/shell/graph-fanin-1.sh
+++ b/test/shell/graph-fanin-1.sh
@@ -3,7 +3,7 @@
 . "$(dirname "$0")/../util.sh"

 # should take more than 25s plus overhead
-$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix --no-pgp yaml --yaml graph-fanin-1.yaml &
+$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix --no-pgp yaml graph-fanin-1.yaml &
 pid=$!
 wait $pid	# get exit status
 exit $?
--- a/test/shell/load0.sh
+++ b/test/shell/load0.sh
@@ -37,7 +37,7 @@ file "${tmpdir}/loadavg" {
 }
 EOF

-$TIMEOUT "$MGMT" run --tmp-prefix --converged-timeout=15 lang --lang "$tmpdir/load0.mcl"  &
+$TIMEOUT "$MGMT" run --tmp-prefix --converged-timeout=15 lang "$tmpdir/load0.mcl"  &
 pid=$!
 wait $pid	# get exit status
 e=$?
--- a/test/shell/net.sh
+++ b/test/shell/net.sh
@@ -52,7 +52,7 @@ sudo mkdir -p /etc/systemd/network
 sudo ip link add $IFACE type dummy || true

 # run mgmt net res with $IFACE and $ADDR set as above
-sudo -A $TIMEOUT "$MGMT" run --converged-timeout=5 --tmp-prefix lang --lang ./net0.mcl &
+sudo -A $TIMEOUT "$MGMT" run --converged-timeout=5 --tmp-prefix lang ./net0.mcl &
 pid1=$!

 # give the engine time to start up
@@ -93,7 +93,7 @@ wait $pid1
 e1=$?

 # run mgmt net res with $IFACE state => "down"
-sudo -A $TIMEOUT "$MGMT" run --converged-timeout=5 --tmp-prefix lang --lang ./net1.mcl &
+sudo -A $TIMEOUT "$MGMT" run --converged-timeout=5 --tmp-prefix lang ./net1.mcl &

 # give the engine time to start up
 sleep 5
--- a/test/shell/prometheus-3.sh
+++ b/test/shell/prometheus-3.sh
@@ -5,7 +5,7 @@
 exit 0	# XXX: temporarily disabled until prometheus is added back post refactor

 # run a graph, with prometheus support
-$TIMEOUT "$MGMT" run --tmp-prefix --no-pgp --prometheus yaml --yaml prometheus-3.yaml &
+$TIMEOUT "$MGMT" run --tmp-prefix --no-pgp --prometheus yaml prometheus-3.yaml &
 pid=$!
 sleep 10s	# let it converge

--- a/test/shell/prometheus-4.sh
+++ b/test/shell/prometheus-4.sh
@@ -5,7 +5,7 @@
 exit 0	# XXX: temporarily disabled until prometheus is added back post refactor

 # run a graph, with prometheus support
-$TIMEOUT "$MGMT" run --tmp-prefix --no-pgp --prometheus yaml --yaml prometheus-4.yaml &
+$TIMEOUT "$MGMT" run --tmp-prefix --no-pgp --prometheus yaml prometheus-4.yaml &
 pid=$!
 sleep 15s	# let it converge

--- a/test/shell/sema-1.sh
+++ b/test/shell/sema-1.sh
@@ -4,7 +4,7 @@

 # should take at least 55s, but fail if we block this
 # TODO: it would be nice to make sure this test doesn't exit too early!
-$TIMEOUT "$MGMT" run  --sema 2 --converged-timeout=5 --no-watch --no-pgp --tmp-prefix yaml --yaml sema-1.yaml &
+$TIMEOUT "$MGMT" run  --sema 2 --converged-timeout=5 --no-watch --no-pgp --tmp-prefix yaml sema-1.yaml &
 pid=$!
 wait $pid	# get exit status
 exit $?
--- a/test/shell/sema-2.sh
+++ b/test/shell/sema-2.sh
@@ -4,7 +4,7 @@

 # should take at least 55s, but fail if we block this
 # TODO: it would be nice to make sure this test doesn't exit too early!
-$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --no-pgp --tmp-prefix lang --lang sema-2.mcl &
+$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --no-pgp --tmp-prefix lang sema-2.mcl &
 pid=$!
 wait $pid	# get exit status
 exit $?
--- a/test/shell/t2.sh
+++ b/test/shell/t2.sh
@@ -3,7 +3,7 @@
 . "$(dirname "$0")/../util.sh"

 # run till completion
-$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix yaml --yaml t2.yaml &
+$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix yaml t2.yaml &
 pid=$!
 wait $pid	# get exit status
 e=$?
--- a/test/shell/t3.sh
+++ b/test/shell/t3.sh
@@ -12,11 +12,11 @@ fi
 mkdir -p "${MGMT_TMPDIR}"mgmt{A..C}

 # run till completion
-$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix yaml --yaml t3-a.yaml &
+$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix yaml t3-a.yaml &
 pid1=$!
-$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix yaml --yaml t3-b.yaml &
+$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix yaml t3-b.yaml &
 pid2=$!
-$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix yaml --yaml t3-c.yaml &
+$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --tmp-prefix yaml t3-c.yaml &
 pid3=$!

 wait $pid1	# get exit status
--- a/test/shell/t5.sh
+++ b/test/shell/t5.sh
@@ -3,7 +3,7 @@
 . "$(dirname "$0")/../util.sh"

 # should take slightly more than 35s, but fail if we take much longer)
-$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --no-pgp --tmp-prefix yaml --yaml t5.yaml &
+$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --no-pgp --tmp-prefix yaml t5.yaml &
 pid=$!
 wait $pid	# get exit status
 exit $?
--- a/test/shell/t5b.sh
+++ b/test/shell/t5b.sh
@@ -3,7 +3,7 @@
 . "$(dirname "$0")/../util.sh"

 # should take slightly more than 35s, but fail if we take much longer)
-$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --no-pgp --tmp-prefix yaml --yaml t5b.yaml &
+$TIMEOUT "$MGMT" run --converged-timeout=5 --no-watch --no-pgp --tmp-prefix yaml t5b.yaml &
 pid=$!
 wait $pid	# get exit status
 exit $?
--- a/test/shell/t6.sh
+++ b/test/shell/t6.sh
@@ -3,7 +3,7 @@
 . "$(dirname "$0")/../util.sh"

 # run till completion
-$TIMEOUT "$MGMT" run --no-watch --tmp-prefix yaml --yaml t6.yaml &
+$TIMEOUT "$MGMT" run --no-watch --tmp-prefix yaml t6.yaml &
 pid=$!
 sleep 10s	# let it converge
 test -e /tmp/mgmt/f1
--- a/test/shell/yaml-change1.sh
+++ b/test/shell/yaml-change1.sh
@@ -16,7 +16,7 @@ fi

 # set the config file
 cp -a yaml-change1a.yaml /tmp/mgmt/yaml-change.yaml
-$TIMEOUT "$MGMT" run --tmp-prefix yaml --yaml /tmp/mgmt/yaml-change.yaml &
+$TIMEOUT "$MGMT" run --tmp-prefix yaml /tmp/mgmt/yaml-change.yaml &
 pid=$!
 sleep 5s	# let it converge
 grep -q 'hello world' /tmp/mgmt/change1	# check contents are correct